360W Metallographic Grinding And Polishing Machine Rotation Speed 1400rpm

Double Disc Metallographic Grinding And Polishing Machine Metallographic Polishing Machine

Brief Introduction:

In the process of Metallographic sample preparation, polishing is a main procedure. After polished on the machine, the sample surface is like a mirror. XGrind-302 Metallographic sample polishing machine is a classic polishing equipment with steady running,small noise,convenient operation and maintenance.

XGrind-302 meets the polishing requirement of all kinds of materials.This machine is suitable for factories and mines enterprises,colleges and universities,scientific research institution.

Technical Specifications:

Polishing discs are covered with soft cloth impregnated with abrasive diamond particles and an oily lubricant or water lubricant.

Particles of two different grades are used: a coarser polish - typically with diamond particles 6 microns in diameter which should remove the scratches produced from the finest grinding stage,

and a finer polish – typically with diamond particles 1 micron in diameter, to produce a smooth surface.

Before using a finer polishing wheel the specimen should be washed thoroughly with warm soapy water followed by alcohol to prevent contamination of the disc. The drying can be made quicker using a hot air drier.

Mechanical polishing will always leave a layer of disturbed material on the surface of the specimen. Electropolishing or chemical polishing can be used to remove this, leaving an undisturbed surface.

metallurgical laboratory equipment

metallurgical sample preparation equipment

360W Metallographic Grinding And Polishing Machine Rotation Speed 1400rpm Images